Install the Air Conditioner in the Case
The installation process is the reverse of the removal
process on page 11 and 12. See Fig 11.
Save time and money! Review the chart below first and you may not need to call for
service.
Possible Causes What To Do
Air conditioner
does not start
The air conditioner is
unplugged.
The fuse is blown/circuit
breaker is tripped.
Power failure.
Make sure the air conditioner plug is pushed
completely into the outlet.
Check the house fuse/circuit breaker box and
replace the fuse or reset the breaker.
If power failure occurs, turn the air conditioner
OFF. When power is restored, wait 3 minutes to
restart the air conditioner to prevent tripping of
the compressor overload.
TROUBLESHOOTING TIPS
.
.
.
Problem
15
Fig. 28
To Next Page
Loading...
