Page 57 RESI219
TOP HINGE WIRING
The top hinge wiring is as follows:
Black 0v dc (Control / Power Board)
Brown +12v dc (Relay Board) (+12v dc between the Brown and Grey wires)
Red +12v dc (Control / Power Board) (+5v dc between the Red and Black wires)
Orange Display Signal (Control / Power Board)
Yellow +12v dc (Relay Board) (+12v dc between the Yellow and Grey wires)(Ice block solenoid)
Grey Common 0v dc
Blue +12v dc (Relay Board) (+12v dc between the Blue and Grey wires)(Auger motor)
Purple +12v dc (Relay Board) (+12v dc between the Purple and Grey wires)(Water valve)
If the Water Paddle is pressed the voltage between the Purple and Grey wires drops to 0v dc
If the Ice Paddle is pressed and Crushed Ice is selected the voltage between the Blue and Grey wires
drops to 0v dc
If the Ice Paddle is pressed and Cubed Ice is selected the voltage between the Yellow and Grey and
Blue and Grey wires drops to 0v dc
To Next Page
Loading...
