To Next PageTo Next Page
Need help?Do you have a question about the Electrolux B Series and is the answer not in the manual?
General| Brand | Electrolux |
|---|---|
| Model | B Series |
| Category | Refrigerator |
| Language | English |
Physical measurements including height, width, and depth.
Details on compressor type, winding resistance, load, and oil charge.
Part numbers for control boards, displays, and housings.
Information on freezer and fridge sensors, including part numbers and temperature cut-ins/outs.
Details on the thermal fuse part number and rupture temperature.
Information on defrost heater part number, ohms, and watts.
Part numbers for freezer and fresh food compartment interior lights.
Specifies the refrigerant type and its charge weight in grams.
Overview of the electronic control system, its components, and operational logic.
Detailed list of electronic control parts like Control Board, Relay Board, and User Interface.
Explains how the electronic system manages cooling, airflow, and defrost cycles.
Details on self-diagnostics, power failure recovery, clock, defrost timing, and failure modes.
Instructions on how to set and adjust freezer and refrigerator temperatures.
Steps to make the freezer compartment colder in 1°C increments.
Steps to make the refrigerator compartment colder in 1°C increments.
How to activate and use the fast freeze function for rapid cooling.
Troubleshooting and resetting the freezer temperature alarm.
Understanding and managing the refrigerator door open alarm.
How to enable or disable the child lock feature to prevent accidental changes.
Instructions for setting a timer to remind about chilling drinks.
Details on the default operating mode, suitable for frequent door openings.
How to activate and the benefits of Eco Mode for energy efficiency.
Instructions for enabling Vacation Mode for extended periods of absence.
Procedure to set the clock after initial power-up or power failure.
Step-by-step guide to adjust hours and minutes for the clock display.
Overview of other functions like ice/water dispensing and memory backup.
How to turn the dispenser light on/off and its automatic activation.
Information on how the system tracks water usage and indicates filter replacement.
Procedure to enter and navigate through the electronic diagnostics modes.
Interpreting OC/SC error codes indicating open or short circuit sensor faults.
Identifying and resolving communication errors (Cn, Er) between control boards.
Instructions for removing the plastic front cover of the ice maker assembly.
Description of the main components within the automatic ice maker.
Details about the die-cast aluminium ice mould and its filling mechanism.
Information on the mould heater's role in ice harvesting and its replacement.
Description of the ice stripper's purpose in preventing ice pieces from falling back.
Explanation of how the ice ejector blades remove ice from the mould.
Information on the solenoid-operated water valve and its flow control.
Details on the thermostat's role in starting the harvest cycle and safety.
How the signal arm controls ice production quantity and stops the maker.
Description of the holding, water valve, and shut-off timing switches.
Explanation of the three-position switch for controlling ice maker power.
The diode's role in dropping voltage for the mould heater.
Information on the TCO as a one-time limit fuse for safety.
Description of the combined Delrin part operating switches.
Details on the plastic gear driven by the motor that rotates cams and ejectors.
Information on the low wattage, stall-type motor driving the ice maker.
The purpose of the Nylon fill trough in directing water to the mould.
Diagram and description of the ice maker's wiring harness connections.
Procedure for manually cycling the ice maker to check its operation.
How to adjust the water fill volume for the ice maker's water valve switch.
Step-by-step guide for removing and reinstalling the ice maker's front cover.
Instructions for detaching and refitting the ice maker's fill trough.
Procedure for removing and refitting the ice ejector blades.
Steps for detaching and reattaching the ice stripper.
Guide for replacing the mounting plate holding the motor and switches.
Procedure for detaching and reinstalling the ice maker motor.
Instructions for removing and installing the water valve switch.
Procedure for detaching and refitting the ice maker's holding switch.
Steps for removing and reinstalling the signal arm shut-off switch.
Guide for removing and installing the ice maker's on/off switch.
Procedure for removing and installing the ice maker thermostat.
Detailed steps for removing and installing the ice maker mould heater.
Common causes and checks for an ice maker that fails to start operation.
Diagnosing issues when the ice maker does not complete its full cycle.
Identifying reasons why the ice maker fails to stop at the end of its cycle.
Diagnosing why the ice maker continues ejecting ice when the bin is full.
Causes for the ice maker producing ice pieces that are too small.
Step-by-step instructions for detaching the freezer door from the cabinet.
Procedure for detaching the food compartment door from the cabinet.
Instructions on how to disengage and remove the door handles.
Detailed steps for removing the front panel of the ice and water dispenser.
Instructions on how to properly pull out and remove the refrigerator door gasket.
Guide for fitting a new door gasket into the door panel groove.
Procedure for removing the control panel housing from the food compartment liner.
Steps for safely disconnecting wiring harnesses from the control panel socket.
Instructions for detaching the polystyrene air flow duct from the housing.
Steps for removing the baffle assembly from the air flow duct.
Procedure to access the relay board and lamp housing for service.
Instructions for releasing the light bulb socket from the control housing.
Procedure to remove air duct, evaporator cover, fan housing, and evaporator.
Steps to disconnect wiring harnesses for the freezer fan, DTT, and heater.
Procedure to access and remove the freezer and food compartment sensors.
Instructions for detaching the ice tray inlet tube.
Steps for sliding out and removing the ice cream shelf.
Instructions for pulling forward and removing the ice bin.
Procedure for removing the ice bin cradle and the entire ice maker assembly.
Steps for disconnecting the ice maker assembly from its cradle.
Instructions for unscrewing and removing the freezer compartment light globes.
Procedure to access control board, compressor, fan, condenser, and water valves.
Diagram illustrating the path of water through the refrigerator system.
Illustrations showing the circulation of air within the freezer and food compartments.
Details on the wiring connections located at the top hinge of the refrigerator.
Wiring diagram for the refrigerator's relay board.
Table detailing voltage readings for various connections on the relay board.
Diagram showing the connections and layout of the main control board.
Overall circuit diagram for the electronic and ice/water system.
