Electrolux Built-in oven User Manual

50 electrolux
Oven Shelves and Shelf Supports
To clean the oven shelves, soak in warm
soapy water and remove stubborn marks with
a well wetted soap impregnated pad.
Rinse well and dry with a soft cloth.
The shelf supports can be removed for easy
cleaning.
Proceed as follows:
1. remove the front screw while keeping the
shelf support in position with the other hand
(Fig. 10);
2. disengage the rear hook and take off the
shelf support (Fig. 11);
3. once the cleaning is carried out, refit the
shelf supports following the procedure in
reverse.
Please, ensure the retaining nuts are secure
when refitting the shelf support.
When cleaning the shelf supports,
take care not to remove the
lubricating grease behind the
telescopic runners. This is meant
to ensure their good operation.
Replacing the oven light
Disconnect the appliance from the
electricity supply.
If the oven bulb needs replacing, it must
comply with the following specifications:
electric power, 15 W/25 W; electric rate, 230
V (50 Hz); resistant to temperatures of 300°C;
connection type: E14. These bulbs are
available from your local Service Force Centre.
To replace the faulty bulb:
1. Ensure the oven is disconnected from the
electrical supply.
2. Turn the glass cover anticlockwise (Fig.
12).
3. Remove the faulty bulb and replace it with
the new one.
4. Refit the glass cover.
5. Reconnect to the electrical supply.
"
Fig. 12
"
Fig. 10
Fig. 11

Electrolux Built-in oven Specifications

General

Brand	Electrolux
Model	Built-in oven
Category	Oven
Language	English