44
4. Some minutes before the oven cycle ending, precooling
cycle starts to prepare the blast chiller cavity for the food
just cooked.
F.14 Cleaning mode
“Cleaning“ function allows to clean the oven cavity automatically
choosing the most suitable programme.
1. Touch the cleaning icon and select the required cycle;
Setting delayed start
• Before touching button open the lower drawer and select
the delay start icon.
• Set the delayed start on the keypad and touch to confirm it.
2. Touch the button to start the cycle;
If you have set the start cycle with the door closing, the
START icon will not be visible on the display.
NOTE!
If the temperature is high the start button is
disabled until the cool down is completed and
the oven is at the correct temperature.
3. The display reminds to take off the cavity items or any
accessories connected to the oven and suggests to load
the various chemicals in the appropriate locations.
Open the door;
4. Put the cleaning agents into the centre bottom of the cavity
or into the front drawer under the oven cavity, depending on
the cycle.
5. Close the door;
The cleaning programme starts.
IMPORTANT
Do not open the door during the cleaning programme!
Thee screen is divided into the following areas:
Legend
A GREEN SPIRIT – ECONOMIZER area
B CLEANING CYCLES area
C DETERGENTS area
A – GREEN SPIRIT – ECONOMIZER area (this function may
not appear on the display)
The following functions allows you to reduce energy con-
sumption and chemical impact to the environment.
Activate this function to exclude the rinse-aid and
descaling agent use;
Skip Rinse Aid and Boiler Descale (in the models with
boiler). Be aware that traces of scale might remain in
the chamber and boiler.
Skip Rinse Aid (in the models without boilers – and
in models that use liquid cleaning).
Be aware that traces of scale might remain in the
chamber.
Activate this function to skip the drying phase; – Skip
Drying Phase
Please open the door after cleaning to allow the oven to
ventilate.
Activate this function to reduce chemicals use; – Time
to save
Be aware that the timing will be extended in order to
maximize the effectiveness of the cleaning with reduced
consumptions.
Green Spirit/Economizer setting
Activate the required function as shown in the example figure:
01:20 h:m
0 1 2 0:
: 0 0
160°C
50%
20
%
25
°C
?
Manual Automatic Programs
Custom Cleaning Settings
Help User Agenda
S o ft
00:00 h:m
Medium
00:00 h:m:
S t r ong
00:00 h:m
E x t r a strong
00:00 h:m
Rinse
00:00 h:m
G r een Spirit
x 3 x 1
L oad solid chemicals
C L E ANING
Green Spirit
x 1 x 2
Load solid chemicals
Soft
Medium
Strong
Extra strong
Rinse
00:59 h:m
01:40 h:m
02:00 h:m
02:57 h:m
00:10 h:m
PM
5:30 100%
120°C
300°C
Delayed
start
CLEANING USER
PM
5:30 100% 120°C300°C
Delayed
start
AM
1 2 3
4 5 6
7 8
0
9
0 9 3 : 0
A u t omatic
01:0 5 h:m
S o ft
00:2 5 h:m
Medium
00: 35 h:m
S t r ong
01:0 5 h:m
E x t r a s t r ong
02:50 h:m
Rinse
00: 4 5 h:m
G r een Spirit
x 3 x 1
L oad solid chemicals
C L E ANING US ER
00:25 h:m
00:35 h:m
01:05 h:m
02:50 h:m
00:45 h:m
Soft
Medium
Strong
Extra strong
Rinse
Green Spirit
Load solid chemicals
x 3
CLEANING USER
!
Empty cavity
Pour the package of the detergents
as shown below
A u t omatic
01:0 5 h:m
S o ft
00:2 5 h:m
Medium
00: 35 h:m
S t r ong
01:0 5 h:m
E x t r a s t r ong
02:50 h:m
Rinse
00: 4 5 h:m
G r een Spirit
x 3 x 2
L oad solid chemicals
C L E ANING US ER
To Next Page
Loading...
Need help?
General
