26
3. Set the parameters of the new added cycles and touch
button to start the cycle.
The running phase is highlighted in green. The phases in
grey in the list are already being performed.
Phases management:
• Touch the 3 dots on the right to open a mini pop-up with the
actions Move, Duplicate and Delete.
NOTE!
The pop-up opens only if the cycle has not started
yet.
• Touch icon in red to close the mini pop-up.
Move phase
Touch this icon to change the position of the phase.
The other phase numbers start blinking.
Touching the required phase number to select the new
position.
Delete phase
Touch this icon to delete immediately the phase.
Duplicate phase
If there is only one phase, it is not possible to move or delete
a phase but only Duplicate.
SKIP option (available during a running programme only):
1. Touch the three dots on the right of the selected phase to
open the mini pop-up with Skip function.
NOTE!
The pop-up opens only if the cycle has already
started.
2. Touch Skip icon to leave the current phase and start
immediately the selected phase.
Lower drawer functions:
• Further actions can be done through the lower drawer:
Save program
Touch this option to save and store customized cycles in
Program mode. Type a name on the numeric keypad to be
assigned.
Clear all phases
Touch this icon to delete all the phases in the Drawer
Multiphase and start again from phase 1.
Before clearing the phases in the drawer, a pop-up window
opens up asking for confirmation.
F.6 Automatic mode
The “Automatic mode“ allows to perform automatically cooking
food in easy-to-use way, just setting a few simple functions.
Cooking in “Automatic mode“ means no need to know cooking
parameters values (temperature, time and humidity) and get
excellent cooking results for each type of food.
Chill
01:30
:00
MAN U AL
Soft / Hard0°C
01:30 h:m
0
°C
7
1
Multiphase
7
2
3
4
5
6
7
8
9
10
7
7
7
7
7
7
7
7
Chill
01:30
:00
MAN U AL
Soft / Hard0°C
01:30 h:m
0
°C
Multiphase
∞
7
9
10
11
12
13
14
15
7
7
7
7
7
7
+
Pause
+
Cycle
+
h:m%
°C
00:30
50
Chill
:00
MAN U AL
Soft / Hard0°C
0
°C
7
1
Multiphase
3
2
3
4
5
6
7
7
7
7
7
7
h:m%
°C
00:10
50
160
h:m%
°C
00:15
80
70 °C
50
%
1
USERMANUAL
00:30:00
25
C
°
2
3
4
5
6
7
∞
25
100
%
°C
0 0 3 0:
: 0 0
00:30 h:m
160°C
01:20 h:m50 % 7°C160
4
Multiphase
25
100
%
°C
0 0 3 0:
: 0 0
00:30 h:m
160°C
01:20 h:m50 % 7°C160
4
Multiphase
USER
Chill
01:30
:00
USERMAN U AL
Soft / Hard0°C
01:30 h:m
0
°C
00:10
50%
100%
h:m 4120
°C
1
Multiphase
20
°C
∞
00:55 h:m 5180
°C
2
3
4
5
6
7
1
01:15
h:m
7
150
°C
01:00 h:m 7120
°C
00:00 h:m 7 20
°C
00:30 h:m 380 °C
00:00 h:m 780 °C
70
°C
00:00 h:m 7 41
°C
50%
Chill
01:30
:00
USERMAN U AL
Soft / Hard0°C
01:30 h:m
0
°C
00:10 h:m 7120
°C
1
Multiphase
20
°C
∞
00:55 h:m 5180
°C
2
3
4
5
6
7
1
01:15
h:m
6
150
°C
01:00 h:m 7120
°C
00:00 h:m 7 20
°C
00:00 h:m 7 20
°C
00:30 h:m 380 °C
00:00 h:m 780
°C
70
°C
00:00 h:m 7 41
°C
∞
∞
50%
100%
50%
Ch ll
01:30
:00
S M
Soft / Hard0°C
01:30 h:m
0
00:00 h:m 70
°C
1
M lt phase
00:00 h:m 70
°C
5
6
7
10
8
9
00:00 h:m 7
-20
°C
00:00 h:m 7-20
°C
00:00 h:m 7
-20 °C
00:00 h:m 7
-20 °C
00:00 h:m 7-20
°C
00:00 h:m 7
-20 °C
00:00 h:m 7
-20 °C
00:00 h:m 7
-20 °C
Ch ll
01:30
:00
S M
Soft / Hard0°C
01:30 h:m
0
00:00 h:m 7-20
°C
1
M lt phase
-20
°C
∞
00:00 h:m 7-41
°C
5
6
7
8
9
10
00:00
h:m
7
80
°C
00:00 h:m 7-20
°C
00:00 h:m 7-20
°C
00:15 h:m 3
00:55 h:m 6200 °C
00:00 h:m 780
°C
00:4 h:m 4160
°C
00:00 h:m 7-41
°C
Delayed
start
Save
program
Clear all
phases
PM
5:30 120°C20% 160°C
%50
50
%
To Next Page
Loading...
