The appliance empties the water out
automatically after approximately 18
hours.
8.4 Prewash
With this option you can add a prewash
phase to a washing programme.
The relevant indicator illuminates.
• Use this option to add a pre-wash phase
at 30 °C before the washing phase.
This option is recommended for heavily
soiled laundry, especially if containing
sand, dust, mud and other solid particles.
This option can increase the programme
duration.
8.5 Time Manager
With this option you can reduce the
programme duration depending on the load
size and the degree of soiling.
Touch Time Manager button to reduce the
programme duration according to your needs.
The display shows the new programme
duration.
This option is not available for every
programme. For more details, refer to
Programme options compatibility in
"Programmes" chapter.
8.6 Delay Start
With this option you can delay the start of a
programme to a more convenient time.
Touch the button repeatedly to set the
required delay. The time increases in steps of
1 hour up to 20 hours.
After touching the Start/Pause
button, the
relevant indicator illuminates and the selected
delay time and the appliance begins the
countdown. The door is locked.
8.7 Start/Pause
Touch the button to start, pause the
appliance or interrupt a running programme.
8.8 On/Off
Press this button for a few seconds to
activate or deactivate the appliance. Two
different tunes sound while switching the
appliance on or off.
As the Stand-by function automatically
deactivates the appliance after several
minutes to reduce the energy consumption,
you may need to activate the appliance
again.
For more details, refer to Stand-by paragraph
in Daily Use chapter.
9. PROGRAMMES
9.1 Programme Chart
Programme
Default tempera‐
ture
Temperature
range
Reference
spin speed
Spin speed
range (rpm)
Maxi‐
mum
load
Programme description
(Type of load and level of soiling)
Cottons
40 °C
90 °C - Cold
1400 rpm
(1400 - 400)
8 kg White and coloured cotton fabrics. Ideal for normal and heavy
soil.
14 ENGLISH