Heat setting Length of the automatic warm up [min:sec]
10:10
2:00
3:30
4:30
---
Using the child safety device
The child safety device prevents unintentional use of the appliance.
Switching on the child safety device
Step Control panel Display/Signal
1.
Switch on appliance. (Do not set a
heat setting.)
2.
Touch for 4 seconds
3. The child safety device is switched on.
Switching off the child safety device
Step Control panel Display/Signal
1.
Switch on appliance. (Do not set a
heat setting.)
2
Touch for 4 seconds lights up
3.
Switch appliance off.
4. The child safety device is switched off.
The child safety device can only be switched on and off, if no heat setting is set.
The child safety device can be switched off in this way for a single cooking
session; it remains activated afterwards.
Overriding the child safety device
Step Control panel Display / Signal
1.
Switch appliance on
2.
Touch for 4 seconds lights up
Until the appliance is next switched off, it can be used as normal. After switching off the appliance, the
child safety device is active again.
After overriding the child safety device, a heat setting or a function must be set
within approx. 10 seconds, otherwise the appliance automatically switches it-
self off.
8 electrolux
To Next Page
Loading...
