Using the timer
Function Condition Outcome after the time has
elapsed
Automatic cut-out a heat setting is set
acoustic signal and
00
flashes,
the cooking zone switches itself
off
Countdown timer cooking zones not in use
acoustic signal and
00
flashes
Selecting a cooking zone
Step Control panel Display
1.
Touch once
Pilot light of the first cooking zone flashes
2.
Touch once
Pilot light of the second cooking zone flashes
3.
Touch once
Pilot light of the third cooking zone flashes
4.
Touch once
Pilot light of the fourth cooking zone flashes
If a heat setting is set on this cooking zone in addition to a countdown timer,
the cooking zone is switched off after the time set has elapsed.
If a cooking zone is switched off, the timer function set is also switched off.
If the pilot light is flashing more slowly, the heat setting can be set or modified.
If other timer functions are set, after a few seconds the shortest remaining time
of all the timer functions is displayed and the corresponding pilot light flashes.
Setting the time
Step Control panel Indicator
1.
Select for the cooking zone
The pilot light for the cooking zone se-
lected flashes
2.
Touch or
00
to
99
minutes
After a few seconds the pilot light flashes more slowly. The time is set. The time counts down.
Switching off the timer function
Step Control panel Indicator
1.
Select for the cooking zone
Pilot light of cooking zone selected
flashes faster. Time remaining is dis-
played
2.
Touch
The time remaining counts backwards
to
00
The pilot light goes out. The Timer function for the selected cooking zone is switched off.
electrolux 9
To Next Page
Loading...
