42
What to do if …
If you are unable to remedy the problem by following the above sug-
gestions, please contact your dealer or the Customer Care Depart-
ment.
1 Warning! Repairs to the appliance are only to be carried out by qualified
service engineers. Considerable danger to the user may result from improp-
er repairs.
3 If the appliance has been wrongly operated, the visit from the customer
service technician or dealer may not take place free of charge, even during
the warranty period.
3 Advice on cookers with metal fronts:
Because of the cold surface at the front of the cooker, opening the oven
door during (or just after) baking or roasting may cause the glass to steam
up.
Problem Possible cause Remedy
The oven does not heat The oven has not been
switched on
Switch the oven on
The required settings have
not been made
Check the settings
The domestic electrical pro-
tection device (fuse) has
been tripped
Check the fuses or protection
devices.
If these are tripped repeated-
ly, you should call a qualified
electrician.
“F2” appears in the display The meat probe plug is not
fitted properly into the socket
Insert the meat probe plug as
far as it will go into the socket
on the side wall of the oven.
The oven light does not come
on
The bulb has blown Replace the bulb
To Next Page
Loading...
