using the oven electrolux 39
Using residual heat with the
Duration and End Time clock
functions
When the Duration and End Time
clock functions are used, the oven
switches the heating elements off, when
90% of the time set or calculated has
elapsed. The residual heat present is
used to continue the cooking process
until the time set has elapsed
(3 to 20 mins.).
Duration and End Time com-
bined
Duration and End Time can be
used simultaneously, if the oven is
to be switched on and off automati-
cally at a later time.
1. Select oven function.
2. Press key repeatedly until the
”Duration/End Time” window ap-
pears.
3. Using the Duration function, set
the time required for cooking the
dish, e.g.: 1 hour.
4. Confirm with .
5. Using the End Time function, set
the time at which the dish is to be
ready, e.g.: 14:05.
6. Confirm with or wait 5 seconds.
7. The selected oven function is dis-
played with the cooking time and
switch-off time set for a few sec-
onds..
To Next Page
Loading...
