Electrolux EWM09312 - Page 18

Technical Support - A.D.L. 18/70 599 74 23-12 Rev.00
ALARM
CODE
Description Possible fault
Action
Machine status
Reset
E61
Insufficient heating during the
washing phase
• Faulty wiring.
• NTC probe for wash cycle faulty.
• Heating element faulty.
• Main circuit board faulty.
The heating phase is skipped START/RESET
E62
Overheating during washing
phase (temperature higher than
88°C for more than 5 min.)
• Faulty wiring.
• NTC probe for wash cycle faulty.
• Heating element faulty.
• Main circuit board faulty.
Safety drain cycle.
Cycle stops with door open
RESET
E66
Heating element power relay
faulty (inconsistency between
sensing and relay status)
• Main circuit board faulty.
Safety water fill.
Cycle stops with door closed.
ON/OFF
RESET
E68
Current leak to the ground
• Earth leakage between heating element and earth.
The heating phase is skipped START/RESET
E69
Heating element interrupted
• Faulty wiring.
• Heating element for washing interrupted (thermal fuse open).
• Main circuit board faulty.
----------------
START
ON/OFF
RESET
E6A
Heating relay sensing faulty
• Main circuit board faulty.
Cycle stops with door locked RESET
E6H
Heating element power relay
faulty (inconsistency between
sensing and relay status)
• Faulty wiring.
• Earth leakage between heating element and earth.
• Main circuit board faulty.
Safety water fill
Cycle stops with door closed.
ON/OFF
RESET