Need help?Do you have a question about the Electrolux FOM 71 CLS and is the answer not in the manual?
General| Brand | Electrolux |
|---|---|
| Model | FOM 71 CLS |
| Category | Washer |
| Language | English |
Details various software versions and their changes for the FOM 71 CLS model.
Procedure for inspecting the reference machine's installation to ensure proper setup and calibration readiness.
Steps for calibrating the water level control system using a ruler and service mode.
Instructions for calibrating the machine's scale system, including zero calibration procedures.
Guide to installing laboratory sensors for temperature and speed, and connecting external weight signals.
Procedures for adjusting temperature, calibrating speed, and managing water levels.
Guidelines for cleaning the machine from debris, lint, scale, and residual detergent.
Essential checks before starting major test periods to ensure machine readiness.
Routine maintenance tasks recommended every 6-12 months for optimal performance.
Explanation of empty run test data and definitions for measured parameters.
Detailed descriptions of various wash programs compliant with IEC 60456 Ed5 standard.
Checks required for the installation of the FOM 71 MP-Lab reference machine.
Procedure for calibrating the level control system for the FOM 71 MP-Lab.
Guide for installing temperature and speed sensors on the FOM 71 MP-Lab.
Overview of temperature, speed, and water adjustments for the FOM 71 MP-Lab.
Instructions for installing the flow meter control system on the FOM 71 MP-Lab.
Procedures for calibrating the flow meter to ensure accurate water measurement.
Guide for setting the correct water volumes for different programs in the flow meter.
Routine maintenance tasks for the flow meter, including impeller checks.
Guidelines for cleaning the FOM 71 MP-Lab from debris, lint, scale, and detergent.
Essential maintenance checks for the FOM 71 MP-Lab before starting test series.
Routine maintenance tasks for the FOM 71 MP-Lab recommended every 6-12 months.
Explanation of empty run test data specific to the FOM 71 MP-Lab.
Detailed descriptions of wash programs for FOM 71 MP-Lab according to IEC 60456 Ed5.
Detailed instructions for installing the flow meter control kit, including physical connections and component placement.
Procedures for changing EPROM for language and software, and initial setup.
Guide to configuring the flow meter, setting volumes (A1, A2), and calibrating the K-factor.
Steps to convert programs for flow meter control, including water settings and parameter adjustments.
Identifies common failures and provides solutions for the flow meter control unit.
To Next Page