2:1
Wascator FOM 71 CLS
Software versions
Software 1.3:
Original software installed from production start
Software 1.7:
Introduced 2004-04-28 from serial number 005200049196
Changes: Following parameters added to Settings 1:
START SLOW FILL MM Default value = 0
IS TEMP ADJUST ADD Default value = 0
IS TEMP ADJUST SUB Default value = 0
Software 1.8
Introduced 2007-01-27 from serial number 005200089296
Changes: Following parameters added to Settings 1:
SPEED CALIB. LOW RANGE IN % Default value = 1000
SPEED CALIB. HIGH RANGE IN % Default value = 1000
SHOWED SPEED CALIB. LOW' Default value = 1000
SHOWED SPEED CALIB. HIGH' Default value = 1000
Software 2.0
Introduced 2009-08-25 from serial number 005200126347
Changes: Software bug regarding first fill corrected.
Following parameters added to Settings 1:
BACKLIGHT Default value
Rev 2.03
Introduced 2009-12-18 from serial number 005220402809
Changes: Default values changed:
IS TEMP ADJUST ADD Default value = 0
IS TEMP ADJUST SUB Default value = 3
Software 3.0
Introduced 2010-04-12 from serial number 005220405727
Changes: Software bug corrected.
Bug does not affect testing in accordance with IEC standards.
All software from 1.30 is suitable for IEC 60456 testing, but version 1.8 is recommen-
ded. Contact your nearest Electrolux Laundry Service Centre for downloading instruc-
tions.
Software versions
To Next Page
Loading...
