11:2
Temp at the end of heating in
final heating: The temperature when the hea-
ting relay is switched off after
reaching 60ºC.
Temp at the end of the main wash: The temperature in the bath
just prior to drain after main
wash.
Amount of water in main wash: The amount of supplied water
to the main wash.
Amount of water in rinses: The amount of water supplied
in each rinse.
Total energy consumption: The total energy consumed
during the program.
Drum Speed: Drum speed measured in RPM.
Water pressure: Water pressure (Static) measured
close to inlet valve and during the
filling of water.
Empty run test data
To Next Page
Loading...
