24:2
Temp at the end of heating in
final heating: The temperature when the hea ting relay
is switched off after reaching 60ºC.
Temp at the end of the main wash: The temperature in the bath just prior to
drain after main wash.
Amount of water in main wash: The amount of supplied water to the
main wash.
Amount of water in rinses: The amount of water supplied in each
rinse.
Total energy consumption: The total energy consumed during the
program.
Drum Speed: Drum speed measured in RPM.
Water pressure: Water pressure (Static) measured
close to inlet valve and during the filling
of water.
Empty run test data
To Next Page