To Next PageTo Next PageWhat to do if flames are uneven on my Electrolux GHS607S Cooktop?
If you're experiencing uneven or lifting flames on your Electrolux Cooktop, start by ensuring the burner cap/crown is correctly fitted. Check that the control knob is set between ‘HIGH’ and ‘LOW’. Also, make sure you're using a cooking pot or pan that's suitable for use and is centrally located on the burner.
What to do if my Electrolux Cooktop flames won't stay on when I release the knob?
If the flames on your Electrolux Cooktop won't stay on when you release the knob, first ensure the control knob is turned on. Also, check that the burner cap/crown is correctly fitted, the knob is set between ‘HIGH’ and ‘LOW’, and the pot or pan is centrally located on the burner.
Why is my Electrolux Cooktop giving low heat and slow cooking?
If your Electrolux Cooktop is producing low heat and cooking slowly, start by ensuring the burner cap/crown is correctly fitted. Check that the control knob is set between ‘HIGH’ and ‘LOW’. Also, make sure you're using a cooking pot or pan that's suitable for use and is centrally located on the burner.
Why is there no spark when I turn the Electrolux Cooktop control knob?
If you're not getting a spark when you activate the control knob on your Electrolux Cooktop, the injector might be blocked, so ensure it is clear of any foreign material. Also, check that the electricity supply is connected and the fuses are working. If your cooktop uses a battery, try replacing it or reorienting it to the correct polarity.
Why won't my Electrolux Cooktop burner light even though it sparks?
If your Electrolux Cooktop burner won't light despite the spark, several factors could be at play. First, check if the gas supply valve is turned on. Ensure the control knob is turned on and corresponds to the burner you're trying to light. Hold the knob down for 5 seconds in the ‘High’ position during the lighting procedure. Also, make sure the ports in the ignition area are clean and dry, and that the ignition electrode is clean. Finally, verify the burner crown is correctly fitted so the spark fires correctly and the injector is clear of any blockage.
What to do if flames are not staying on when knob is released on Electrolux GHS607S Cooktop?
If the flames on your Electrolux Cooktop aren't staying on when you release the knob, ensure the knob is set between the ‘HIGH’ and ‘LOW’ positions. Also, when lighting, hold the knob down for 5 seconds in the ‘High’ position to allow the flame safeguard to engage.
What to do if my Electrolux GHS607S doesn't spark when I turn the knob?
If your Electrolux Cooktop isn't sparking when you turn the control knob, check if the electricity supply is connected and the fuses are working. If it uses a battery, ensure it isn't flat and is correctly oriented. Also, verify that the ignition electrode is clean and dry.
Why are the flames uneven on my Electrolux GHS607S Cooktop?
Uneven or lifting flames on your Electrolux Cooktop may be due to blocked or wet flame ports; try cleaning or drying them. Also, ensure the burner cap/crown is correctly fitted.
Why is my Electrolux Cooktop stainless steel discoloured?
Discoloration of the stainless steel on your Electrolux Cooktop might be because the pot or pan you're using is too large. Make sure the pot sizes used are as per user manual requirements. Clean with STEEL POWER (available through spare parts).
Why is my Electrolux Cooktop benchtop or knobs overheating?
If the benchtop or knobs on your Electrolux Cooktop are overheating, it could be due to using an incorrect cooking pot or pan. Also, make sure the pot or pan is centrally located on the burner.
General| Brand | Electrolux |
|---|---|
| Model | GHS607S |
| Category | Cooktop |
| Language | English |
