Electrolux ICON E24CM75GSS - Installation; Tools Needed for Installation

Installation 11
TOOLS NEEDED FOR INSTALLATION
[] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] []
• Phillips screwdriver
• Measuring tape
• Level
• Drill with 1/16" drill bit
[] [] [] [] []
STEAM BARRIERINSTALLATION
[] [] [] [] !! [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] I!
Position the steam barrier inside the top of the cut-out. Push it towards the
back wall until the back edge lines up with the back of the cabinet.
Attach it with the eight (8) provided screws.
[]
Steam Barrier
(provided)
o
I
!