10 Installation
BEFOREYOU START
il [] [] [] [] [] il [] !1 [] [] [] Ii II [] [] [] [] [] II [] []
Remove the coffee maker from the packaging and inspect it for damage. Do not
install a damaged maker. To prevent damage to the control panel door, do not set
the appliance on the floor or counter prior to installation.
Check to make sure all parts are included.
PARTSLIST
[] [] [] [] [] [] [] [] [] [] [] [] [] []
• Steam barrier with mounting screws
o
[] [] [] [] [] [] [] []
2 guide assemblies with mounting screws
6" metal shims, 1116" (lmm)
Three foot 114" to 314" flexible water supply hose(E24CM76GSS)
Use & care guide
Detergent tablets (sample)
Spare tank O-ring (model E24CM75GSS)
Spare piston assembly O-ring
Allen wrench (for grinder adjustment)
Anti-liming powder (sample)
Measuring cup for ground coffee
Cleaning brush
Keys (taped to the right side of the unit)
To Next Page
Loading...
