25
G1 Basic controls
On/Off
This key indicates the status of the equipment: on or
off. When the appliance is on, the key is lit.
Hood opening/closing (for automatic versions
only)
These buttons open/close the hood, only in automatic
versions.
Wash cycle 1
This button starts wash cycle 1. This cycle is recommen-
ded for washing not very dirty dishes.
Wash cycle 2
This button starts wash cycle 2. This cycle is recom-
mended for washing normally dirty dishes.
Wash cycle 3
This button starts wash cycle 3. This cycle is recommen-
ded for washing very dirty dishes.
High Productivity or NSF/ANSI 3 compliant mode
This button is used to go from High Productivity wash
mode to NSF/ANSI 3 compliant mode and vice versa.
Drain / self-cleaning cycle
This button starts a drain / self-cleaning cycle.
Delime cycle
This button is used to run a machine water circuit
delime cycle with vinegar.
When a cycle is selected, the corresponding button is
lit up.
To Next Page
Loading...
Need help?
General
