Instructions for use
11
487 18 39 01 - 300/500/750 - GB
Manual operation with RMC (residual moisture control)
Industrial laundry OPL (on-premises-laundry)
Check that
the filter is
clean
Start:
Press the start/stop
button
Stop:
Press the
start/stop button or
open the door.
Take care!
Garments may fall
out when the door
opens.
The last few
minutes of the
drying time are
the cooling-down
period
(the garments are
cooled).
Restart:
Close the door
again and press
the start/stop
button.
Load
garments
into the
machine.
If the tumble dryer is not emptied after
the drying time has ended, an anti-wrinkle
program is automatically started.
This means that the drum rotates at short
intervals, thereby almost completely
avoiding creasing.
To prevent
creasing:
Empty the tumble
dryer as soon as
the program has
ended.
High: 70 - 85°C non-iron/normal wash,
cotton and mixed fabrics.
Drying at normal heat.
Low: 50°C Fine wash/mild wash,
Delicate fabrics. Drying at low heat.
No heat:
suitable for airing bedspreads, duvets
and bedclothes, etc.
85°C
70°C
50°C
Select
tempe-
rature