Electrolux Unic Tango Ace - Page 50

50
Tango 0060 5-2021
General Operation:
All Screen Buttons Grey and not functioning
Software versions in Display Screen and CPU are not compatible
Update both using the same USB
Turntable piled with wet co󰀨ee
Brew valve exhaust blocked by water in drain
Make sure machine is mounted with slight forward tilt so drain manifold empties.
Machine won’t switch ON; main contactor doesn’t engage. Toggle switch not lighted
Faulty ON/OFF Toggle switch
Faulty main 10A fuse
Machine won’t switch ON; main contactor doesn’t engage. Toggle switch lighted
F3 Fuse, 24volts on board
F4 Fuse
Faulty contactor coil
Drink Dispensing Screen Problems cont:
Unable to run co󰀨ee drink – Drink icon frozen on screen.
Drink can be canceled with “Stop”
Co󰀨ee grams may be set to “0” in Specic Programming
Milk Drink Only: – Drink icon freezes after co󰀨ee ow – also freezes after cancel
Must switch o󰀨 to clear
Milk or foam time set to “0” in Specic Programming
All Drinks grayed out
CPU & Display software versions not compatible, update both to most current version
Troubleshooting