Electrolux WE170P - 2 Warnings and Safety

7
2 WARNINGS
 Any work on electrical appliances must only be carried out by qualified
technicians.
Before you access internal components, take the plug out of the socket to cut the
power supply.
 Make resistance measurements, rather than direct voltage and current
measurements
 When replacing the heating element, replace it with one
that has the same characteristics (2 thermal fuses) in order
not to compromise the safety of the appliance. Do not
remove/switch the NTC sensors between heating elements.
 Always empty the appliance of all the water before laying it
on its side (see the relevant paragraph).
 Never place the appliance on its right side (electronic control system side): some
of the water in the detergent dispenser could leak onto the electrical/electronic
components and cause these to burn.
 When replacing components, please refer to the code shown in the list of spare
parts relating to the appliance.