Electromed WellnessPro + - AC Adapter and Power Requirements; Adapter Connection and Voltage

© 2018 Electromedical Technologies, Inc. Phoenix, AZ USA. Any use of editorial, pictorial or layout composition of this publication without express written consent from Electromedical Technologies,
Inc. is strictly prohibited. This publication was written, illustrated and prepared for print by Electromedical Technologies, Inc
14
AC Adapter:
Plug the WellnessPro+
®
AC adapter into the back of the unit,
Then into a wall outlet.
Figure 4: AC Power adapter
Voltage requirements:
The AC adapter included with your WellnessPro+
®
unit is a universal adapter and can be used in any country
all over the world.
NOTE: The WellnessPro+
®
unit MUST ONLY be powered with the medical adapter that has the WellnessPro+
®
logo on it. (Input: 100-240 V~, 50-60Hz, 400mA Output: 7.5 V DC, 2.5 A)