Need help?Do you have a question about the Electromed WellnessPro + and is the answer not in the manual?
Explains key symbols and their meanings for safe operation of the device.
Details intended uses, conditions to avoid, and essential safety information.
Covers environmental conditions, cleaning procedures, and radiofrequency interference.
Describes the two main waveform operational modes and their characteristics.
Details specific biphasic pulse characteristics and diagrams for wave types 1 and 2.
Explains burst, amplitude modulated, and combination wave types with their parameters.
Covers channels, voltage, frequency range, modes, power, and physical attributes.
Lists package contents and describes keyboard functions and controls.
Illustrates the rear and side panels of the device, including ports and connectors.
Instructions for connecting the adapter and details voltage specifications.
Details the benefits and operation of the LEMO QUICK-LOK connector system.
Shows how to connect input cables to the device's output channels.
Step-by-step guide on using the LEMO connectors correctly to avoid damage.
Instructions for connecting lead wires to the input cable.
How to attach lead wires to electrodes and snap-on wire adapters.
Lists device certifications and key electrode features like durability and conductivity.
Compares electrode performance based on dispersion tests against a competitor.
Explains each data field shown on the device screen, such as Code, Frequency, and Time.
Details the operation of each button and control knob on the device interface.
Explains how to increase/decrease intensity using control knobs for each side.
Discusses target area placement for pain relief and specific conditions.
Illustrates electrode positioning for various pain types like knee, back, and neck pain.
Displays dermatomes and nervous system charts for electrode placement reference.
Steps to turn the device on/off and describes the initial screen appearance.
Explains how to use pre-programmed Auto Codes with examples.
Instructions for running pre-programmed single codes with examples.
Demonstrates selecting and starting a single code with screen display.
Guides users to combine single codes into custom Auto Codes.
Details the process of selecting and saving codes for custom Auto Codes.
Completes the process of creating and finishing custom codes.
Guides users to store frequencies into custom Auto Codes.
Details how to input frequency and duration for custom Auto Codes.
Covers selecting wave types and adding multiple frequencies for custom Auto Codes.
Instructions on completing and starting custom codes.
Explains how to activate and deactivate dual stimulation mode.
Details the steps to run Auto Codes in dual mode.
Shows how programs run and complete in dual mode with screen indicators.
Explains LED stripe behavior during dual mode operation.
Instructions for turning the FLUX function on and off.
How to adjust the frequency fluctuation range for the FLUX mode.
Guides on inputting the desired FLUX range for frequency fluctuation.
How to prepare the unit for running multiple consecutive Auto Codes in standard mode.
Steps to select and input multiple Auto Codes for sequential playback.
Describes program completion and return to READY mode.
How to prepare for multiple Auto Codes in dual mode.
Inputting codes for both sides in dual mode for sequential playback.
Completing the code entry for dual mode and starting the sequence.
Describes program completion and return to READY mode for dual operation.
Details backing up and restoring programs to/from a STIM card.
Explains POD transfer and selecting multiple Auto Codes for the STIM card.
Describes running custom programs directly from the STIM card.
Instructions for enabling or disabling the unit's LED indicators.
How to turn the device's sound alerts on or off.
How to turn on the microcurrent function for the device.
Details controlling microcurrent independently for each side of the unit.
Explains how to adjust microcurrent intensity and switch between sides.
Covers deactivating the feature and mode availability.
Provides a quick reference for custom code creation using single codes.
General| Brand | Electromed |
|---|---|
| Model | WellnessPro + |
| Category | Medical Equipment |
| Language | English |
To Next Page
