© 2018 Electromedical Technologies, Inc. Phoenix, AZ USA. Any use of editorial, pictorial or layout composition of this publication without express written consent from Electromedical Technologies,
Inc. is strictly prohibited. This publication was written, illustrated and prepared for print by Electromedical Technologies, Inc
43
Screen will appear as follows:
Desired FLUX Value is selected (we chose 1 as an example)
Multi AUTO: on
WellnessPro PLUS
Enter FLUX range (1-10 Hz)
1
FLUX: on Dual STIM: on
SELECT button is pressed and confirmation message is displayed
2 seconds after, screen will change to the READY mode
(Standard or Dual, depending on the state prior to pressing the FLUX button)
NOTE: This feature could be accomplished with the old WellnessPro 2010 but it would require a lot of programming on the
user’s side.
Multi AUTO: on
WellnessPro PLUS
Enter FLUX range (1-10 Hz)
FLUX: on Dual STIM: on
Multi AUTO: on
WellnessPro PLUS
FLUX range confirmed
FLUX: on Dual STIM: on
To Next Page
Loading...
