© 2018 Electromedical Technologies, Inc. Phoenix, AZ USA. Any use of editorial, pictorial or layout composition of this publication without express written consent from Electromedical Technologies,
Inc. is strictly prohibited. This publication was written, illustrated and prepared for print by Electromedical Technologies, Inc
23
Functions: Dual mode, FLUX mode, Multi AUTO and Backup and restore will be explained into detail in the
chapter “Functions description” located on page 38 of this manual.
Intensity Level Controls:
To increase or decrease the intensity level output on the electrodes use the intensity level knobs as follows:
Rotating left intensity level knob clockwise will increase the intensity level on electrodes plugged
into socket A
Rotating left intensity level knob counterclockwise will decrease the intensity level on electrodes
plugged into socket A
Rotating right intensity level knob clockwise will increase the intensity level on electrodes plugged
into socket B
Rotating right intensity level knob counterclockwise will decrease the intensity level on electrodes
plugged into socket B
NOTE:
After a code stops running and the time reaches "0:00", you will hear a short audio melody. This sound will
warn you that the existing code ended and a new one will begin shortly.
To ensure a smooth transition between the codes, “Fade-in” and “Drop down” features are implemented.
“Fade-in” will gradually increase the intensity level. “Drop down” will automatically reduce the strength of the
output after every frequency.
NOTE: Every frequency has a very distinct sensation. Certain high frequencies such as 10,000.00 Hz are very
mild and barely noticeable, while frequencies in lower range, such as 465.00 Hz are stronger. You may not
experience a feeling of energy on high frequencies.
To Next Page
Loading...