© 2018 Electromedical Technologies, Inc. Phoenix, AZ USA. Any use of editorial, pictorial or layout composition of this publication without express written consent from Electromedical Technologies,
Inc. is strictly prohibited. This publication was written, illustrated and prepared for print by Electromedical Technologies, Inc
58
After 5 seconds of inactivity, the black highlight bar will disappear. Once you set your microcurrent level,
increase the lead intensity to the desired level.
As a safety precaution, as soon as microcurrent level is changed, “Lead intensity level” will drop to zero.
To turn off this feature, from READY mode, press the button.
Message on the screen will show “Microcurrent control: Off”
Press CLEAR to return to READY mode.
NOTE: Turning On/Off this feature can only be done in READY mode.
Feature is available in Standard, DUAL and MULTI mode and can be combined with FLUX feature as well.
To Next Page
Loading...
