Electromed WellnessPro + - Finalizing Dual Mode Multi AUTO Setup

© 2018 Electromedical Technologies, Inc. Phoenix, AZ USA. Any use of editorial, pictorial or layout composition of this publication without express written consent from Electromedical Technologies,
Inc. is strictly prohibited. This publication was written, illustrated and prepared for print by Electromedical Technologies, Inc
49
Press SELECT button and the unit will ask for the new AUTO Code
Desired AUTO CODE is selected (we chose 444 as an example)
SELECT button is pressed and new AUTO code is selected, etc.
This process can repeat UP TO 50 times to run up to 50 consecutive auto codes on SIDE B.
To complete entering the AUTO Codes for SIDE B and to start the program, press START button.
FLUX: on
WellnessPro PLUS
Enter Multiple AUTO Codes (Side B)
352
Multi AUTO: onDual STIM: on
FLUX: on
WellnessPro PLUS
Enter Multiple AUTO Codes (Side B)
Multi AUTO: onDual STIM: on
FLUX: on
WellnessPro PLUS
Enter Multiple AUTO Codes (Side B)
444
Multi AUTO: onDual STIM: on