© 2018 Electromedical Technologies, Inc. Phoenix, AZ USA. Any use of editorial, pictorial or layout composition of this publication without express written consent from Electromedical Technologies,
Inc. is strictly prohibited. This publication was written, illustrated and prepared for print by Electromedical Technologies, Inc
50
The screen will appear as follows:
WellnessPro PLUS
Multi AUTO: on
Side A
Code: 102
Frequency: 10,000.00 Hz
Time: 3:00 min.
Total time: 60:00 min.
Wave type: 1
Lead intensity level: 20%
Side B
Code: 352
Frequency: 3,040.00 Hz
Time: 3:00 min.
Total time: 96:00 min.
Wave type: 1
Lead intensity level: 20%
Dual STIM: on
After the first AUTO Code is complete on either side, the next one will start. The program will continue until all
of the selected AUTO codes are complete. In our example, the program on “Side A” is finished while the
program on “Side B” is still running. The LED stripe on the side that is complete will start glowing orange, while
the LED stripe on the side that is still running will have a blue stripe performing FADE-IN/FADE OUT.
WellnessPro PLUS
Multi AUTO: on
Program
Completed
Side B
Code: 352
Frequency: 1,600.00 Hz
Time: 3:00 min.
Total time: 36:00 min.
Wave type: 1
Lead intensity level: 20%
Dual STIM: on
Once the program on the other side is over, a new message will appear, LED stripe will change color from blue
to orange and screen will appear as follows:
Pressing the CLEAR button will return the unit to ready mode and screen will appear as follows:
FLUX: on
WellnessPro PLUS
Program
Completed
Program
Completed
Multi AUTO: onDual STIM: on
To Next Page
Loading...
