© 2018 Electromedical Technologies, Inc. Phoenix, AZ USA. Any use of editorial, pictorial or layout composition of this publication without express written consent from Electromedical Technologies,
Inc. is strictly prohibited. This publication was written, illustrated and prepared for print by Electromedical Technologies, Inc
19
Connecting the Lead Wires with Accessories
Plug the exposed end of the cable into the hole of the electrode (left) or into the Snap-on wire adapter if you
are using the self-adhesive electrodes (right).
Our electrodes are made with highly durable yet soft silicone material. Their conductive rubber pads feel
comfortable on the skin while the low resistance design gives an effective treatment every time.
To Next Page
Loading...