14. EARLY STARTUP MENU
61
When the transfer is finished the message “UPGRADING... DO NOT TURN OFF” appears. During the up-
grade, the <TRIG> LEDs will light up one after another, first in a dimly lit cycle (erasing the old OS) and then
in a second cycle with fully lit LEDs (writing the new OS). Please note that this takes a little while. When this
process is finished, the OS is updated, and the unit restarts.
• When you send the OS syx file, use our free SysEx utility C6. It can be downloaded from
the Elektron website.
• If the Analog Rytm receives the OS upgrade through the MIDI ports, use the Elektron TM-1
USB MIDI interface for up to 10x transfer speeds.
To Next Page
Loading...
