16. USEFUL KEY COMBINATIONS (QUICK KEYS)
65
16. USEFUL KEY COMBINATIONS (QUICK KEYS)
Use the key combinations below to quickly perform certain tasks.
GENERAL
[FUNCTION] + [REC] will perform a copy command. Action depends on the currently active page or mode.
[FUNCTION] + [PLAY] will perform a clear command. Action depends on the currently active page or
mode.
[FUNCTION] + [STOP] will perform a paste command. Action depends on the content that was copied.
NAMING
[FUNCTION] + [ARROW] (on the NAMING screen) to choose a letter.
[FUNCTION] + [NO/RELOAD] (on the NAMING screen) to erase a letter.
ASSIGN SYNTH / SAMPLE
Double-tap [SYNTH] to access MACHINE (Synth engine) selection.
Double-tap [SAMPLE] to access SAMPLE selection (from the 127 user samples of the active Kit).
When SAMPLE selection is open, pick a slot and press [FUNCTION] + [YES/SAVE] to access +Drive sam-
ples.
SAVING AND RELOADING
[YES/SAVE] + [FX] will save Kit.
[NO/RELOAD] + [FX] will reload Kit.
[YES/SAVE] + [MUTE] will save Sound.
[NO/RELOAD] + [MUTE] will reload Sound.
[YES/SAVE] + [SCENE] will save Pattern.
[NO/RELOAD] + [SCENE] will reload Pattern.
[YES/SAVE] + [CHROMATIC] will save Track.
[NO/RELOAD] + [CHROMATIC] will reload Track.
[YES/SAVE] + [PERF] will save Song.
[NO/RELOAD] + [PERF] will reload Song.
MENU ACCESS
[FUNCTION] + [TRACK] to open the GLOBAL menu.
[FUNCTION] + [FX] to open the KIT menu.
[FUNCTION] + [MUTE] to open the SOUND menu.
SEQUENCER SETTINGS
[FUNCTION] + [TEMPO] to tap tempo.
[FUNCTION] + [RETRIG] to access the CLICK TRACK settings.
[FUNCTION] + [TRIG SETUP] to access the QUANTIZE settings.
[FUNCTION] + [PAGE] to access the pattern / track SCALE settings.
MUTES AND SOLO
[FUNCTION] + [PADS] will mute/unmute one or several Tracks (activate by releasing [FUNCTION]).
[RETRIG] + [PADS] to solo enable Track (multiple Tracks may be solo:ed).
SEQUENCER RECORDING
[RECORD] + [PLAY] to start LIVE RECORDING.
[RECORD] + double-tap [PLAY] will activate/deactivate QUANTIZE LIVE RECORDING.
[NO/RELOAD] + one of the [PADS] during LIVE RECORDING to clear the trigs from a sequencer track.
To Next Page
Loading...
