6) Test the combination and function(prior to finish this step, don’tclose the door)
A. Pull up the handle, then press the handle from exterior, if cannot be
pressed down, it’s good, then move to next step.
B. Press the handle from interior, the latch can be moved back, it’s good,
move to next step.
C.Pull up the handle from interior once, then input the correct combination,
press the exterior handle down, if can press the handle down and latch can
be moved back. The combination works.
If passed all above 3 steps, everything is good,
congratulations! the installation is DONE
To Next Page
Loading...