How to fix a noisy picture on Element ELDFT551?
If your Element LCD TV picture is noisy, snowy, or ghosting when watching TV, it is likely due to a poor antenna signal. If you are using an indoor antenna, try adjusting its position. Also, check the antenna connections to ensure they are secure.
What to do if there is no sound on my Element ELDFT551 LCD TV?
If your Element LCD TV has no sound, first ensure that the mute function is off. Next, check the volume settings to make sure the volume isn't set too low. Finally, if you're using external audio connections, verify that all leads are properly connected.
Why does my Element ELDFT551 show a blue screen?
If your Element LCD TV displays a blue screen, it indicates that there is no signal. To resolve this, press the INPUT button on your remote to select the correct source.
Why is my Element LCD TV dead with no LED light?
If your Element LCD TV is dead and no LED is lit, it means the TV is not receiving power. Check all connections to the TVâs AC socket to ensure they are properly connected.
What to do if my Element LCD TV is dead, and the LED is not lit orange?
If your Element LCD TV is dead and no LED is lit orange, the TV might be in standby mode. Press either the Power button or the Standby button on the remote control to turn it on.
General| Screen Size | 55 inches |
|---|---|
| HDMI Ports | 3 |
| USB Ports | 1 |
| Refresh Rate | 60 Hz |
| Smart TV | No |
| Built-in Wi-Fi | No |
| Audio Output | 10W x 2 |
| Resolution | 1920 x 1080 |
| VESA Mount Compatibility | 200mm x 200mm |
| Display Type | LED LCD |
Guidelines for safe electrical connections and handling of the TV to prevent hazards.
Precautions for physical placement, cleaning, and handling to avoid damage or injury.
How to switch between different input signals like TV, HDMI, VGA, and AV.
Steps to enter the parental menu and set or change the password.
How to enable and configure program rating blocks for content restriction.
Solutions for common issues like no power, blue screen, or no sound.
Troubleshooting steps for remote control malfunctions and poor signal reception.
Solutions for poor picture quality, screen shaking, and VGA mode specific issues.
To Next Page
