Element Flat Panel Television - Customizing the TV Settings

34
Chapter 3 Using the TV
 Press the button to turn the TV on.
 Press the MENU button on the remote control to display the Main menu, and use the
◄► buttons to select TV.
 Use the ▲▼buttons to highlight an individual TV option, use the ◄► buttons
changes the setting, and press the MENU button to exit the menu.
 The TV menu includes the following options:
Channel Scan Press the OK button, the Channel Scan automatically creates a list of
receivable channels.
Tuner Mode Allows you to select between CATV cable and antenna signal sources:
▪ AIR
Choose this setting if you are receiving TV channels with an antenna
(over the air)
▪ Cable
Choose this setting if you are receiving TV channels with a CATV
(cable TV)
Channel Skip Allows addition/removal of channels on the channel list.
 Press the OK button to display the Channel Skip menu:
Customizing the TV Settings
TV
Channel Scan
Tuner Mode Cable
Channel Skip
Favorite List
Time Zome Eastern Time
Enter Select
Exit
Channel Skip
2 ABC Analog
3 DISC Analog
4 Analog
5 Analog
6 Analog
7 Analog
8 Analog
9 Analog
10 Analog
Set Select
Exit