MAXIMUM NUMBER OF IGNITIONS PER HOUR M1 - M4
This parameter allows you to set the maximum number of engine starts in
an hour beyond which the alarm is triggered.
If set to 0, control is not active
ENGINE STOP FOR MAXIMUM IGNITION NUMBER ALARM
This parameter allows the engine to be stopped if the alarm for the
maximum number of starts per hour is triggered.
NUMBER IGNITIONS PER HOUR M1 - M4
Only display of number of starts.
NETWORK REENTRY DELAY
This parameter allows a fixed time from grid return to be activated before
turning on the pumps if controls are active.
ALARM HISTORY
Displaying the last 10 recorded alarms
To Next Page
Loading...