eClip Full User Guide 13
Taking Care of Your eClip
There is very little you have to do to take care of your eClip. It does not require calibration
or maintenance, aside from periodically changing the battery. See Changing the eClip
Battery on the next page for more information about how to change the battery.
If you notice that the eClip has become dirty clean it off with a damp cloth. Accumulated
dust can interfere with the temperature sensors.
Storage Environment Temperature:
Operation Environment Temperature:
Do not drop the eClip to the ground. Physical shocks can damage its electronics.
If you store the eClip in near freezing conditions, allow it to acclimate to room temperature
before use.
The optimal operating conditions for the eClip are as follows:
·
Temperature: -4 ºF to 158 ºF (-20 ºC to 70 ºC)
·
Humidity: Less than 95% non-condensing
·
Temperature 39 ºF to 122 ºF (4 ºC to 50 ºC)
·
Humidity: Less than 95% non-condensing
The eClip is not water resistant. Do not use cleansing sprays.
Do not immerse the eClip in water.
Caution:
To Next Page
Loading...
