eClip Full User Guide 7
After your first successful set up and pairing of the app, when you next
launch and pair with the eClip, the app should go directly to the connecting screen.
Note:
If you own two eClips make sure that you have disconnected from the first
eClip before beginning to pair with the second one.
More than one person can install the eClip app and be within range of the eClip, but the
eClip can only be paired with one smartphone at a time.
Note:
Installing the eClip in Your Car
As you can see from the eClip packaging, you have your choice of four convenient options
to secure the eClip.
Once you’ve chosen a location for the eClip set it in place, as follows:
Baby car
seat strap
Standard adult
seat belt
Diaper bag
strap
Included strap
accessory
Always check manufacturers’ recommendations before attaching
the eClip to the strap of your baby’s car seat or your vehicle’s adult seat belt.
Always make sure that the eClip stays out of your baby’s mouth and
that no liquids are spilled on or into it. See Taking Care of Your eClip on page 13 for
more information.
WARNING!
WARNING!
Before attaching the eClip’s H-grip to purse or diaper bag, make sure that
it is a compatible size, to prevent the eClip from accidently falling off the strap.
Please regularly check that the app and the clip are still paired.
Note:
Note:
1 2
1. Slide one edge of the strap
under one side of the H-clip
on the back of the eClip.
2. Push the other edge of the
strap under the second side
of the clip. It should fit snugly.
To Next Page
Loading...