Safety instructions
GB-2
Important safety instructions!
The following instructions must be observed
at all times.
• For use in dry rooms only.
• Use unmodified elero original parts only.
• Keep persons away from the systems guide
track.
• Keep children away from controls.
• Always comply with national stipulations.
• Always dispose of used batteries properly.
Always replace batteries with identical type
(LR 03; AAA).
• If the system is controlled by one or more
transmitters, the system guide track must be
visible during operation.
• The equipment contains small parts that could
be swallowed.
GB
Warning!
Safety instructions......................................... GB- 2
Explanation of buttons .................................... GB- 3
General information ....................................... GB- 4
Designated use............................................. GB- 4
Notes........................................................ GB- 5
Wall holder installation ................................... GB- 5
Explanation of functions .................................. GB- 6
Manual/Automatic sliding switch .................... GB- 6
Transmission control light ............................ GB- 6
Group control .......................................... GB- 6
Programming radio channel settings..................... GB- 7
Programming transmitter/channel................... GB- 7
Programming additional transmitters ............... GB- 7
Intermediate position for roller shutter/awning/
venetian blind.............................................. GB- 9
Programming intermediate position ................. GB- 9
Programming ventilation/reverse position .......... GB- 9
Adjustment to intermediate position ................ GB-10
Adjustment to ventilation/reverse position ......... GB-10
Deleting intermediate position....................... GB-10
Deleting ventilation/reverse position ................ GB-10
Deleting radio channel settings........................... GB-11
Deleting individual transmitters ..................... GB-11
Deleting all transmitters.............................. GB-11
Technical data.............................................. GB-12
Cleaning .................................................... GB-12
Battery replacement....................................... GB-12
Troubleshooting............................................ GB-12
General declaration of conformity........................ GB-12
Contents
GB-1
To Next Page
Loading...
