elero VarioTel - User Manual

Questions and Answers

P
perezanitaJul 27, 2025
What to do if elero VarioTel Transmitter drive is not functioning but the transmission control light is illuminated?
- S
  Scott EvansJul 28, 2025
  If your elero Transmitter's drive isn't working but the transmission control light is on, it could be due to these reasons: * The receiver might be out of range. Try moving it closer to ensure it's within the radio operating range. * The transmitter may not be programmed into the receiver. In this case, you'll need to program the transmitter.
J
Justin BrownAug 2, 2025
Why is my elero Transmitter drive not functioning and the transmission control light is not illuminated?
- A
  Angela MilesAug 2, 2025
  If the drive of your elero Transmitter isn't working and the transmission control light is off, the issue is likely with the batteries. Either the batteries are empty, so you should replace them, or the batteries are inserted incorrectly. Remove them and re-insert properly.
L
lindseylindsayAug 8, 2025
Why is the transmission control light flashing on my elero Transmitter?
- A
  Angela MyersAug 8, 2025
  If the transmission control light on your elero Transmitter is flashing, it means the battery power is low. Replace the batteries to resolve this issue.
K
Katie ValdezAug 13, 2025
How to fix elero Transmitter when drive moves in wrong direction?
- C
  Craig AndersonAug 14, 2025
  If the drive of your elero Transmitter is moving in the wrong direction, it means the directions have been set incorrectly. To fix this, delete the transmitter and re-programme it correctly.
S
Sheila Stout PhDAug 20, 2025
What to do if selected drive is not functioning on elero VarioTel Transmitter?
- M
  Monica SilvaAug 20, 2025
  If the selected drive of your elero Transmitter is not functioning, it's likely because the wrong group has been selected. Make sure to select the correct group.

Summary

Safety Instructions

Important Safety Instructions

Key safety guidelines to observe at all times for proper operation and user protection.

Explanation of Buttons

Explanation of Functions

Programming Radio Channel Settings

Programming Transmitter;Channel

Step-by-step guide to pair a transmitter with a receiver and define its operational behavior.

Programming Additional Transmitters

Process for adding more transmitters to an already programmed receiver for expanded control.

Intermediate Position for Roller Shutter;Awning;Venetian Blind

Programming Pos V

Procedure to set the intermediate position for roller shutters and awnings using the DOWN button.

Programming Pos A

Procedure to set the ventilation or reverse position for awnings/venetian blinds using the UP button.

Adjustment to Pos V

Adjustment to Pos A

Deleting Radio Channel Settings

Deleting Individual Transmitters

Deleting All Transmitters

Troubleshooting

Battery Replacement

Troubleshooting Common Issues

elero VarioTel Specifications

General

Frequency	868.3 MHz
Power Source	Battery
Battery Type	CR2032
Battery Life	up to 2 years
Operating Temperature	-20°C to +60°C
Weight	60 g
Transmission Power	10 mW