EasyManua.ls Logo

Elfa BLDF99 - Oven Maintenance and Care; Cleaning and Care Instructions; Replacing the Oven Lamp

Elfa BLDF99
21 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
How to keep Your Oven in Shape
This appliance is for household use only,don’t use it outdoors!
Important: Before cleaning your oven, or performing maintenance, disconnect it
from the power supply.
To extend the life of your oven, it must be cleaned frequently, keeping in mind that:
Do not uses steam equipment to clean the appliance.
To protect against the risk of electrical shock, do not immerse the unit, cord or plug in water
or other liquid or sprinkle water to clean the appliance!
Don’t clean the appliance when it still hot! The inside and external surface of the oven should
preferably be cleaned by damp cloth when it is cooled down.
Wash all accessories in hot sudsy water or in a dishwasher, wipe dry with a paper or cloth
towel.
If you use your oven for an extended period of time, condensation may form. Dry it using a
soft cloth.
There is a rubber seal surrounding the oven opening which guarantees its perfect functioning.
Check the condition of this seal on a regular basis. If necessary, clean it and avoid using
abrasive products or objects to do so. Should it become damaged, please contact your nearest
After-sales Service Centre. We recommend you avoid using the oven until it has been
repaired.
Never line the oven bottom with aluminium foil, as the consequent accumulation of heat
could compromise the cooking and even damage the enamel.
Clear the glass door using damp cloth and dry it with a soft cloth..
Do not use harsh abrasive cleaners or sharp metal scrapers to clean the oven door glass since they
can scratch the surface, which may result in shattering of the glass.
Replacing the Lamp in the Oven
Cut off the supply of power to the oven by turning off the omni-polar switch connecting it to
the mains, or by removing the plug if it is accessible;Aovids appearing the electric shock;
Unscrew the glass cover attached to the lamp holder;
Unscrew the lamp and replace it with another high-temperature lamp (300) with the
following characteristics:
- Voltage: AC220V-240V
- Wattage: 15W
- Socket: E 14
Remount the glass cover and reconnect the appliance to the power supply.
WARNING: Ensure that the appliance is switched off before replacing the lamp to avoid the

Related product manuals