Need help?Do you have a question about the elgris HYBRID BASIC and is the answer not in the manual?
General| Supply voltage | 24 V DC |
|---|---|
| Power consumption | 5 W |
| Number of digital inputs | 8 |
| Number of digital outputs | 8 |
| Number of analog inputs | 2 |
| Number of PWM outputs | 2 |
| Protection class | IP20 |
| Weight | 150 g |
| Communication interfaces | RS485 |
| Operating temperature | -20°C to +60°C |
States that the HYBRID BASIC series controller currently consists of one model.
Outlines essential safety measures to follow before and during installation.
Describes the physical components and layout of the HYBRID BASIC controller.
Provides a detailed list of all pins and their functions on the controller.
Illustrates the wiring connections for grid and fuel saving modes.
Details the pin configuration for the RS 485 communication interface.
Explains the function and settings of the controller's dipswitches.
Explains the meaning of the on-board LEDs for system status indication.
Describes how to read current parameters and values from the controller.
Details the procedure for modifying controller settings via the interface.
Lists and explains the available parameters for system configuration and measurement.
Explains how to configure the controller's relay outputs for different modes.
Details how to set limits for grid feed-in and manage grid consumption.
Explains the fuel-saving mode and its optimization for diesel generators.
Provides step-by-step instructions for powering on the system for the first time.
Presents the main dashboard and system status overview displayed on the interface.
Explains how to configure and add inverters to the system via the GUI.
Describes the functionality for storing and visualizing data on the elgris cloud platform.
Covers general system settings, including IP address, date, time, and advanced options.
Details how to integrate multiple generators using elgris SMART METERS.
Illustrates a system setup with dual generators and optional energy storage.
Provides a method for manually adjusting PID parameters for system stability.
Describes the Ziegler-Nichols method for PID controller parameter tuning.
Lists register mappings for the SunSpec Common Model.
Lists register mappings for the WYE connect meter model.
Provides a custom MODBUS register mapping starting from address 41000.
To Next Page