7.Inaccurate fuel consumption
The unit for fuel consumption is L/100KM, HUD display is the single driving fuel
consumption, while car display is Integrated average driving fuel consumption, so it is
normal if there are difference.
HUD display three kinds of fuel consumption
a.Idle mode: HUD display Instantaneous fuel consumption per hour (L/H), it means
HUD can figure out how much oil the car will consumed after start engine in one
hour
b. Driving mode: HUD display Instantaneous fuel consumption of 100KM
c. Finish driving: HUD display is average fuel consumption of 100KM, when turn off
the car, HUD will auto turn off in 10s
8.Setting for the over speed alarm
The default over speed alarm value is 150.If the user want to adjust the value, please
do as follow steps:
When HUD is working, vertically press in the setting button for 5 seconds to enter
into the menu, short press in the button for 4 times, the screen shows 150,which
means the HUD will give the alarm once the speed over 150,up or down the button
to change the value as you want, vertical press in the button for 5 seconds to save
the data.
9. When HUD cannot automatically power off or can power off but it re-start again
Vertical press in 5 seconds to enter into menu setting, short press 10 times to menu
10,the default parameter is 0, up or down change it to 13.2V -13.8V, vertical press in
5 seconds to save and exit.
10.HUD will power off when driving
When Automatic start/stop system cars is driving,HUD will turn off automatically
Set the menu 11,change the default value to 01:80 or 03:00
To Previous Page
Loading...