Elite Screens ezCinema Tab-Tension CineGrey 4D Series User Manual

V10192023DT (DS1527)
www.elitescreens.com
1
ezCinema Tab-Tension CineGrey 4D Series
Portable Ceiling/Ambient Light Rejecting
Floor Pull-Up Projector Screen
USER’S GUIDE – E/H Type V1.0
Visit www.elitescreens.com for latest updated version.
Product Description
Thank you for purchasing the ezCinema Tab-Tension portable free-standing projector screen. The
ezCinema Tab-Tension is a pull-up screen that conveniently raises and retracts using a telescoping
support bar which allows the screen to promptly be setup and taken down.
Elite Screens allows a 1.5% tolerance within the viewing surface for expansion and contraction
of the screen materials over time.
Precautions:
Warning! Screen damage can result from product mishandling if the following precautions
are not followed.
•
In accordance with practicing home fire safety and avoiding screen damage, do not place the
screen near or beside a fireplace or high temperature objects such as a gas stove, BBQ or
heater.
•
Place the screen beyond the reach of children.
•
Do not use the screen in a very strong windy environment.
•
Do not use on uneven surfaces.
PARTS IDENTIFICATION
Lock
Buckle
Front
Black Masking
Border
Long Foot Cup
Housing
Short Foot Cup
Upper Scroll bar
Projection
Viewing Area
Telescope
Support Rod
Back
Box Cover
(Lid)
Bottom Black
Masking
Pull-up Handle
Hanging Hook
Locking sleeve

Elite Screens ezCinema Tab-Tension CineGrey 4D Series Specifications

General

Screen Material	CineGrey 4D
Screen Format/Aspect Ratio	16:9
Viewing Angle	160 degrees
Ambient Light Rejection	Yes
Black Levels	Enhanced
Diagonal Size	100 inches
Installation Type	Wall/Ceiling Mount
Compatibility	Compatible with most projectors

Summary

Product Description and Safety

Safety Precautions

Essential safety warnings and precautions to prevent screen damage and ensure safe operation.

Parts Identification

Identifies and labels all the key components of the projector screen for easy recognition.

Screen Setup and Installation

Extend Base Feet

Instructions for extending and positioning the screen's base feet for stability.

Open Box Cover

Guidance on unlatching buckles and opening the projector screen's protective box cover.

Install Support Rod

Steps for correctly installing the telescopic support rod into the screen's support plate.

Deploy the Screen

Instructions on how to gently lift and hang the screen using the pull hook.

Vertical Screen Adjustment

Detailed steps for adjusting the screen's height using the locking sleeve and support rod.

Screen Assembly Complete

Confirms screen assembly is complete and notes handle placement for keystone correction.

Screen Storage and Retraction

Retract Screen

Instructions for loosening the locking sleeve and shortening the telescopic support rod.

Store Base Feet

Guidance on rotating the base feet counterclockwise to align them with the housing.

Optimal Projection Installation

Standard Throw Projector Installation

Examples for correct ceiling and table-top projector angles for standard throw projectors.

Ultra/Short-Throw Projector Installation

Examples for incorrect ceiling and table-top projector angles for ultra/short-throw projectors.

Screen Maintenance and Care

Adjust Screen Material Flatness

Instructions on using the tightening mechanism to improve screen flatness and remove waves.

Screen Care Guidelines

Important points for maintaining screen surface integrity and ensuring sound projection performance.