VMAX2/Spectrum Vertical Limit Switch Adjustment Instructions
Caution: The screen’s Top Black Drop is already set to its maximum drop distance. There is NO extra
black top drop in the roller. Attempting to increase the drop will damage the motor and VOID your
warranty with Elite Screens. Do not use these instructions to try and get more out of your standard
black masking drop. Please contact Elite Screens before making any adjustments.
1. Allen Wrench
Fig. 1
2. Limit Adjustment Switches
Fig. 2
(Note: When turning the limit switches, bear in mind that one full-circle turn in either direction will create a one
inch adjustment)
To Next Page
