Elkay LZSG8WS 1B Series User Manual

To reset the lter count on original EZH2O bottle lling stations like the one above,
you will rst need to access the control board toggle switch.
To do this, you will need to rst open the top of the bottle ller by removing the
two screws on the top. They are hex type (non-security), so you will need
a 5/32 Allen wrench.
UH-OH...
You’ve changed the lter,
but the light is still red!
COMMERCIAL RESTROOM ACCESSORIES
Distributed By
WWW.RESTROOMDIRECT.COM
704•937•2673
129 Oak Park Dr., Unit A,
Mooresville, NC 28115

Elkay LZSG8WS 1B Series Specifications

General

Model	LZSG8WS
Product Type	Water Dispenser
Mounting Location	Wall Mount
Finish	Stainless Steel
Bubbler Activation	Push Button
Bottle Filling Activation	Push Button
Hertz	60
Chilling Option	Yes
Cooling Capacity	8 GPH
Water Temperature	50°F
Material	Stainless Steel
Heating Capacity	Not Applicable
Power Consumption (Heating)	Not Applicable
Certification	NSF/ANSI 61
Voltage	115v