Elkay LZSG8WSSK User Manual

To reset the lter count on original EZH2O bottle lling stations like the one above,
you will rst need to access the control board toggle switch.
To do this, you will need to rst open the top of the bottle ller by removing the
two screws on the top. They are hex type (non-security), so you will need
a 5/32 Allen wrench.
UH-OH...
You’ve changed the lter,
but the light is still red!
COMMERCIAL RESTROOM ACCESSORIES
Distributed By
WWW.RESTROOMDIRECT.COM
704•937•2673
129 Oak Park Dr., Unit A,
Mooresville, NC 28115

Elkay LZSG8WSSK Specifications

General

Material	Stainless Steel
Cooling Method	Compressor
Filtration	Yes
Bubbler Activation	Push-button
Bottle Filling Rate	1.5 GPM
Filter Included	Yes
Flow Rate	1.5 GPM
Finish	Stainless Steel
Power	115V
Activation Method	Push Button
Refrigeration Capacity	8.0 GPH
Installation	Wall-mounted
Certifications	NSF 61, NSF 372