EasyManua.ls Logo

Elkay SOFT SIDES EDFPBM117WS-F User Manual

Elkay SOFT SIDES EDFPBM117WS-F
9 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
0000001029 (Rev. E - 06/16)
EDFPBM117WS EDFPBM117WS-F
Page 1
Review these instructions before beginning installation. Be sure that installation
conforms to all plumbing, electrical and other applicable codes.
When installation is complete, ensure these instructions are left in the plastic bag
provided inside the installed unit for future reference.
Service to be performed by authorized service personnel only.
INSTALLER
NOTE: It is common practice to ground electrical hardware such as telephones, computers and other devices
to available water lines. This can, however, cause electrical feedback in the plumbing circuit, which
results in an “electrolysis” effect occurring in the fountain. This may result in water which has a
metallic taste to it or has a noticeable increase in the metallic content of the water.
When inspecting plumbing circuit, remember the line may be grounded some distance from the
installation, and may occur outside the building or area in which the unit is being installed.
This condition can be avoided (in most cases) by using recommended materials during installation.
Any drain ttings provided by the installer should be made of plastic which will electronically isolate
the fountain from the remainder of the building’s plumbing circuits.
LZWS-EDFPBM117KEZWS-EDFPBM117K
SOFT SIDES
Fountains with FLEXI-GUARD
and EZH
2
O
®
Bottle Filler
INSTALLATION, CARE & USE MANUAL

Questions and Answers:

Elkay SOFT SIDES EDFPBM117WS-F Specifications

General IconGeneral
Product TypeOutdoor Fountain
Number of Stations1
MaterialStainless Steel
FinishBrushed
Bubbler TypeVandal-Resistant
Drain LocationBottom
Rated For Outdoor UseYes
Activation MethodPush Button

Summary

Required Tools and Materials

Special Tools

List of specialized tools required for installation.

Additional Materials Not Included

List of necessary materials not provided with the unit.

Installation Procedures

Bottle Filler and Water Connections

Steps for connecting the bottle filler, waste, and water supply.

Stream Adjustment and Verification

Verifying bottle filler operation and adjusting bubbler stream height.

Panel and Cover Installation

Installing cover plates, bottom panel, and optional panels.

Filter System Components

WaterSentry Plus Filter Parts List

Detailed parts list for the WaterSentry Plus filter.

Control Board Settings and Programming

Software Verification and Button Access

Verifying software and accessing the programming button.

Filter Monitor and Capacity Settings

Resetting the filter monitor and setting filter capacity.

Sensor and Unit Type Configuration

Adjusting IR sensor range and setting unit type.

Bottle Count Reset

Procedure to reset the bottle counter.

Parts and Installation Package

Installation Package Contents

Details of components included in installation package boxes.

Main and Bottle Filler Parts Lists

Lists of parts for the main unit and bottle filler replacement kits.

Troubleshooting and Maintenance

Orifice Assembly Issues

Addressing mineral deposits on the orifice and flow regulation.

Quick Connect Fittings Operation

Instructions for connecting and disconnecting water fittings.

Related product manuals