Dialing from the phone’s directory
You can store up to 250 names and numbers in the telephone directory. To select a name, you can page
through the directory using the arrow buttons, or enter the specific first letter(s) of the name using the
push-button set.
a
s
t
O<> O
bg
Tel. drctry
Enter first letter Select entry
For information on how to program and configure the telephone directory, please refer to page 15 of these
operating instructions.
Dialing from the VIP memory
YoucanprogramVIPnumbersforeach of the ten buttons 1 …0includinganame(20characters max. )and
a telephone number (26 digits max.).
a
s
or
tbg
VIP
Select
VIP
destina
-
tion
Select VIP
destination
For information on how to program VIP entries, please refer to page 16 of these operating instructions.
Direct dialing with function keys
Direct dialing is initiated using the direct dialing keys. Each of the keys can be programmed with two
functions or direct dialing numbers.
a
Z
bg
Press the function key
Use the function keys to select the desired number.
Ifyouwishtodialanumberfromthesecondlevel,pressthecorrespondingkeytwo times. Thismust beexe
-
cuted at a short interval.
You can program the direct dialing / function keys via thePC configuration program or the extended confi
-
guration of the telephone.
Dialing from the caller/memo list
The phone has a combined caller and memo list. A maximum of 30 entries (calls, memos SMS messages or
UUS1- messages) are stored in this list. Entries in the caller or memo list are indicated by the »Caller
list« softkey.
a
s
b
Caller list
Select entry
Further functions
Accepting/rejecting a call
albg
English
12
To Next Page
Loading...